SP201E
Working voltage: DC5-24V
Working current: 24mA-110mA
Control capacity: 1024 pixels
Output signal: SPI signal
Built-in modes: 99 types
Control mode: button control, DMX512 console control
RGB sequence: RGB (customizable)
Net weight: 269g
Wiring mode: CLK DATA GND+5 channel large MOS
Max 2000 channels
Output signal: SPI signal, colorful signal, synchronous DMX512 signal
Support driver IC: conventional single-line or dual-line IC+RGB+RGBW+RGBWW
DMX512 Decoder Operation Instructions
1. Features:
1. 5~40V Power supply,wire connection is simple and very easy to use;
2. Support almost every kind of one-wire or two-wire LED-DRIVER-IC ;(Can be customized)
3. Support kinds of DMX512 controllers, support up to 3072 DMX512 channels;
4. Recognize DMX512 signal automatically;
5. With 45 kinds of patterns,which are vivid and beautiful;
6. Each decoder can control up to 2048 pixels;
7. Works in single or multiple synchronous modes.
2. Functions Of Each Port:
|
Left side |
5~40V |
5~40V Power supply |
|
|
IC SEL |
Select IC |
||
|
AUTO |
Run internal pattern automatically |
||
|
SPEED |
Switching mode |
||
|
MODE |
Switching speed |
||
|
Right side
|
IN
|
DMX+ |
DMX512 input signal + |
|
DMX - |
DMX512 input signal - |
||
|
GND |
Ground |
||
|
OUT
|
DMX + |
+ pole of DMX512 signal cascade to the next decoder |
|
|
DMX - |
- pole of DMX512 signal cascade to the next decoder |
||
|
GND |
Ground |
||
|
CLK |
Clock output |
||
|
DATA |
Data output |
||
|
GND |
Ground |
||
3. Parameters：
Operating Voltage：5~40V
Power Consumption: less than 1W
4. Operating Instructions：
1. Works with external DMX512 signal:
Make sure that wire connections are correct, input the DMX512 signal and the decoder can recognize and decode it.
2. Running the internal patterns:
Switching patterns by pressing MODE single time forwardly;
Switching the running speed by pressing the SPEED button;
Pressing the AUTO button to jump to the patterns automatically.
3. Using toggle switch:(will support more Driver-IC follow-up)
When switch 1 to ON: To control WS2801; When switch 1 and 2 to ON: To control UCS1903 or APA 104;
When switch 2 to ON: To control WS2811; When switch 1 and 3 to ON: To control TM1804 or TM1809;
When switch 3 to ON: To control LPD6803; When switch 1 and 4 to ON: To control APA 102;
When switch 3 to ON: To control LPD6803; When switch 2 and 3 to ON: To control UCS9812;
5. Wire Connections：
1. One decoder work without DMX512 signal input:
2. One decoder work with DMX512 signal input:
3. More than one decoders work with DMX512 signal input:
