HX-SZ100-SYNCDIM-14K
Adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt RF remote control, transmission Distance up to 20m，no need line-of-sight. 14 function buttons, intuitive panel allowing intelligent lighting with brilliant simplicity. Particularly, HX-SZ100-SYNCDIM series are designed with big power output as 25A (1CH)/300W in the Max. Further, it can be easily connected by RJ45
Product Feature
- Adopt PWM technology, dimming from 0% to 100%, smooth and flicker-free.
- Adopt RF remote control, transmission Distance up to 20m，no need line-of-sight.
- Easy connection to achieve multiple dimmers sync-work by RJ45 terminal.
- HX-SZ100-SYNCDIM series are designed with big power output as 25A (1CH)/300W in the Max.
- 2-year warranty.
Technical Parameters
| Working temperature | -20-60℃ |
| Working voltage | DC12V~24V |
| External dimension | L127*W41*H32 (mm) |
| Packing size | L147*W85*H73 (mm) |
| Net weight | 180g |
| Gross weight | 210g |
| Output gray | 256 levels |
| Max. Output current | 25A(1channel) |
| Max. Output power | 300W |
| Frequency of RF remote control | 433.9MHz |
| RF remote rang: | 20M |
Interface Specifications
Direction for use
Adopts RF 14-key remote control, intuitive panel allowing intelligent lighting with brilliant simplicity.
The function of each button as below:
| OFF | ON | ||
| 25% level | 50% level | 75% level | 100% level |
| Scene 1 | Scene 2 | Scene 3 | Scene 4 |
| Delay Off 30’s | Brightness/Speed- | Brightness/Speed+ | Dynamic mode |
RF CODE
Receiver can be controlled by any one the same remote as factory default; remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.
Matching code operation
If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:
1.Step 1: Pressing key “DELAY OFF” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
2.Step 2: Pressing “ DELAY OFF” 3times in 3 seconds ,corresponding to the operation, the LED’s brightness will change as 25%-10%-back to preset level.
3.Code learning successfully, the receiver only can be controlled by the remote.
4.If not, please re-operate from step 1 to 2.
Clear code operation
Back to factory default, receiver can be controlled by any one the same remote control.
1.Step 1: Pressing key “FUN” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
2.Step 2: Pressing “ FUN” 3times in 3 seconds ,corresponding to the operation, the LED’s brightness will change as 25%-10%-back to preset level.
3.Code learning successfully, the receiver only can be controlled by the remote.
4.If not, please re-operate from step 1 to 2.
Typical Applications
Conjunction Diagram:
Application Diagram:
Product information for placing order
| Product name | Item number |
| RF Dimmer | HX-SZ100-SYNCDIM-14K |
